Trang chủ Sản phẩm Fire Proof Panel

Modern Material in Dry Partition Wall System

Foreseeing that the dry partition wall will emerge as the new focus to modern technology in homes, we would like to introduce you to M-Board - a safe, high performance, and easy-to-work construction board.

The M-Board is suitable for a wide range of applications, for environments requiring a fire rating as well as for more general building board usages. It represents a significant advance in construction board technology to meet increasingly stringent building regulations and demands for ever higher standards of durability, safety and economy.

Manufactured to exacting tolerances, the product is classified as Class 'A1' in its fire performance. Suitable for drywall, linings, partitions, ceilings, fire doors, fixed and floating floors, and external cladding, it offers a number of unique advantages - for both cost and performance - over the fire rated and other boards currently on the market.

More About M-Board:
More Advantages
M-Board is manufactured from a combination of Magnesium Oxide, Magnesium Chloride and fibrous reinforcement. It does not contain any organic solvents, asbestos, oil, or toxic components, or any heavy metal salts. Low level of energy is consumed in the manufacturing process since the entire process is conducted at room temperature. Any scrap or drop-off may be reground and reused in production of M-Board. Thus, this product is considered Sustainable and Environment Friendly. Due to these traits, M-Board is safe to use and easy to dispose as it will not cause any damage to land, streams or bodies of water.
Impact Resistance Vermin Resistance
Chemically Stable Formaldehyde Free
Asbestos Free Thermal Insulation
More Application
Comes in 1220mm x 2440mm standard size and board thickness range from 3mm to 20mm, M-Board has a smooth side suitable for painting, and a rough side suitable to application of ceramic tile. Therefore, it can be used more than just for Dry Wall Partition.
Typical Application Recommended Board Thickness
3 4 6 8 9 10 12 15 18 20
Fire & Acoustic Insulation        *  *  *  *  *  *  
Fire Door Linings *  * *              
Wall Partition & Internal Linings     * * *  * * *    
Ceilings, linings, soffits & tiles    *  * *  * * *      
Substrate for decorative laminates *  * *  *            
Substrate for ceramic tiles etc      *  * * * *  *    
Under roof, eaves linings & soffits        * * * * *    
External fascia board             * * *  
External wall linings           * *  *  *  
Floor substrate                *  * *
Prefabricated buildings, wall & ceiling       *  * * * * *  
  Technical Data
Dimensional Tolerence (mm)
    Thickness              -0.2mm , +0.4 mm
    Width                 -2 .0mm, +2.0 mm
  Length             -2 .0mm, +3.0 mm
Squareness             Less than 5 mm
Mechanical, Phisical and Chemical Properties
Description Unit Test Result
Density (Average) Kg/m³ 1100 ± 100
Bending Strength N/mm² ≥ 12.1
Tensile Strength N/mm² ≥ 1.97
Impact Strength N/mm² 3
Moisture Content % 9 ± 5
Moisture Exposure Expansion Rate % ≤ 0.2
Thermal Conductivity W/mK 0.139
Surface Alkalinity pH Between 9.5 ~ 10
Asbestos Check NA Not Detected
Sound Transmission Loss Test Data (ASTM E 90 - 04 / E 413 - 04)

Specimen: wall partition assembly constructed in the (14ft W by 9 ft H) test opening with (92mm) 18 ga. Metal studs, 100mm insulation, 1 layer of 12mm M-Board wallboard both sides

Sound Transmission Class STC = 54dB Sum of unfavourable deviations: 25.0 dB Max. Unfavourable deviation: 8.0dB at 125 Hz
 Fire Resistance Test (BS 476: Part 22: 1987)

Specimen: partition system with overall dimensions of 3,025mm wide by 3,050mm high by 70mm thick, comprised of a layer of 12mm thick M-Board mounted on each side of galvanized steel frame and a layer of 46mm thick mullite crystal fibre blanket with density of 94 kg/m3 sandwiched in between the boards.

Insulation: 132 Minutes
Integrity: 150 Minutes (no failure)
The test was discontinued after a period of 150 minutes.

The above information is provided for indicative purposes
 What to Consider
Value M Board Calcium Silicate Board Cement Board Gypsum Board
Flame Spread 0 0 0 Low
Smoke Development None None None Low
Water Resistant Yes Yes No No
Termite Resistant Yes Yes No No
Thermal Insulation R-Value per inch 1.2 1.0 0.8 1.1
Impact Strength High High Medium Low
Density 1000kg/m3 1200 -1300kg/m3 1200 -1250kg/m3 550 – 750kg/m3
Combustibility Non Non Non Facing
Environment Good Good Good Normal
Swelling after in water 0.2% 0.78% 0.7 – 1.8% 1.5 – 2.5%
*Above is only for brief comparison, actual data may be different subject to various productions
Project Reference
Where M-Board has and is being used:
Hong Kong DisneyLand Hong Kong Ferry Terminal
Hong Kong Architectural Services Landmark Shopping Centre HK
The Fringe Club, HK Hong Kong Exhibition Centre
Palm Resort UAE Sand Casino, Macau